Lowbrow Customs Shotgun Exhaust Pipes 1990-03 Harley-Davidson Sportster XL Chrome

Whether giving you added ground clearance on a scrambler or tracker, or just for high-and-tight style on a rigid or swingarm Sportster, the Shotgun Exhaust Pipes from Lowbrow Customs make quick work of improving your motorcycle’s look and sound. Quick and E-Z bolt-on install with the included heavy-duty mounting brackets and hardware. Available in your choice of chrome or high-temp black. Made in Cleveland, Ohio USA!

• Two chrome plated exhaust pipes
• Mounting brackets in your favorite color, black
• Mounting hardware
• Requires use of your existing stock exhaust flanges
• Compatible with Lowbrow Customs Cast Heat Shields
• The outside diameter (OD) of these exhausts is 1.75″, and the inside diameter (ID) is 1.60″.
• Made in the USA
• See Additional Information below for fitment.

Other things you might find useful are several colors of

exhaust header wrap

, and you can also check out our selection of finned, smooth and fish scale cast aluminum

motorcycle exhaust heat shields

. These will keep you and your passenger from accidentally burning your leg while riding, plus there is the added benefit of their cool style.

Important Exhaust Notes:
Note: As with any new exhaust, you may need to change carburetor jetting or use of an aftermarket fuel injection control module for peak performance.

Note: For 1986-1989 models you would need to modify the exhaust bracket to work with the stock chain drive and change the starter motor to a later, smaller size starter than the stock Hitachi starter.

Note: These will not work fit on motorcycles with aftermarket hardtail as the bracket will not work with the hardtail modification.

WARRANTY NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Blueing is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. No refunds on exhaust pipes once motorcycle is started unless there’s a manufacturer’s defect.

WARRANTY NOTE: Using header wrap on exhaust pipes will void the warranty. Lowbrow Customs will not take returns or replace damaged exhaust pipes that were wrapped. Many motorcyclists use header wrap to either keep the heat away from their leg or just ‘for looks’. Header wrap not only keeps heat away from anything near it, it keeps the heat inside the pipes. Header wrap is designed specifically to keep the heat in the header to improve the scavenging of the cylinders. Keeping the heat in keeps the exhaust speed high, which is good for performance. The issue is that, especially if the motorcycle is running lean, the metal of the exhaust can be at near molten (or molten) temperatures, causing the pipe to disintegrate or crack. This typically happens close to the exhaust port / head. For this reason we will not replace pipes that are damaged by excessive heat due to header wrap.