Cycle Standard Pop-Up Gas Cap – Chrome – Non-Vented – For Harley 1996 & Later

This pop-up gas cap adds a clean, low-profile look to your 1996 and later Harley-Davidson motorcycle (and most aftermarket gas tanks). This non-vented gas cap sits nearly flush with the surface of your gas tank. On Harleys with two fillers on the gas tank, this cap is for the left-hand side, which uses a non-vented (unvented) gas cap.

To use, simply place fingers on center of cap, rotate cap 1/4 turn, and the spring loaded center pops-up. Turning the center then unscrews the entire assembly, after screwing cap back in, push down on the center section and rotate it 1/4 turn to return the center to the flush position.

The diameter of the pop-out cap with knurled edge is 1.5″. The diameter of the trim ring section (largest diameter section that lays flat against the gas tank) is 2.35″.